WiSer Product Manual
  • Introduction
    • Introduction to WiSer
    • Key Features
    • List of Potential applications using WiSer
  • Package Contents
    • What's Included
  • Getting Started
    • Device Overview
    • System Requirements
    • Safety Precautions
  • WiSer Setup
    • WiSer Devices connection setup
    • Powering On the Devices
    • LED Indicators
  • Driver Installation
    • No Drivers Required for WiSer
  • Using Wiser
    • WiSer Devices Connection Setup
    • Accessing the Serial Port
    • Baud Rate Configuration
    • Flow Control Options
    • DTR Control Signal
    • Data bit, Parity and Stop bits
    • Initiating Serial Communication
  • Broadcast Mode (Optional)
  • Wireless Connectivity
    • Pairing WiSer Devices
    • Connecting to Embedded Devices
    • Troubleshooting Wireless Connections
  • Advanced Features
    • Firmware Updates
    • Independent ESP32-S2 Dev Boards
  • Frequently Asked Questions (FAQ)
    • Common Issues and Solutions
  • Technical Specifications
    • Device Specifications
    • Compliance Information
  • Further Support
    • Customer Support Contact
  • Appendix
    • Glossary of Terms
    • Regulatory Information
Powered by GitBook
On this page
  • Device Specifications
  • Compliance Information

Technical Specifications

Device Specifications

WiSer-USB:

  • Dimensions: 37.8 x 20.4 x 8.2 mm (35.8 x 14.4 x 4.7 mm without enclosure)

  • Wireless Protocol: ESP-NOW on 2.4GHz Wi-Fi (IEEE 802.11b/g/n)

  • Supported Baud Rates: up to speed of 921,600 baud

  • Power Supply: USB Bus Power

WiSer-TTL:

  • Dimensions: 36.5 x 38.4 x 9.8 mm (28 x 29 x 4.3 mm without enclosure or header pins)

  • Wireless Protocol: ESP-NOW on 2.4GHz Wi-Fi (IEEE 802.11b/g/n)

  • Supported Baud Rates: up to speed of 921,600 baud

  • Power Supply: USB Bus Power or +5V and GND header pins or +5V and GND castellated pins

Compliance Information

WiSer devices comply with applicable regulations. For detailed compliance information, please visit our website.

Last updated 1 year ago