WiSer Product Manual
  • Introduction
    • Introduction to WiSer
    • Key Features
    • List of Potential applications using WiSer
  • Package Contents
    • What's Included
  • Getting Started
    • Device Overview
    • System Requirements
    • Safety Precautions
  • WiSer Setup
    • WiSer Devices connection setup
    • Powering On the Devices
    • LED Indicators
  • Driver Installation
    • No Drivers Required for WiSer
  • Using Wiser
    • WiSer Devices Connection Setup
    • Accessing the Serial Port
    • Baud Rate Configuration
    • Flow Control Options
    • DTR Control Signal
    • Data bit, Parity and Stop bits
    • Initiating Serial Communication
  • Broadcast Mode (Optional)
  • Wireless Connectivity
    • Pairing WiSer Devices
    • Connecting to Embedded Devices
    • Troubleshooting Wireless Connections
  • Advanced Features
    • Firmware Updates
    • Independent ESP32-S2 Dev Boards
  • Frequently Asked Questions (FAQ)
    • Common Issues and Solutions
  • Technical Specifications
    • Device Specifications
    • Compliance Information
  • Further Support
    • Customer Support Contact
  • Appendix
    • Glossary of Terms
    • Regulatory Information
Powered by GitBook
On this page

Broadcast Mode (Optional)

Last updated 1 year ago

Enable Broadcast Mode (Optional)

If you have multiple WiSer-enabled devices and want to establish wireless serial communication between them without physical cables, you can enable the Broadcast Mode. This mode allows seamless serial communication between multiple devices in your environment.

How to Enable

Using Broadcast Mode

  • Once enabled, each host system or embedded device connected to a WiSer-USB or WiSer-TTL device gains the ability to broadcast data to all other connected devices.

Note:

  • Enabling Broadcast mode disables internal encryption in WiSer devices. But, you can always add encryption and device filtration in your application code.

  • By default, WiSer devices are equipped with firmware that includes pre-paired devices, facilitating secure point-to-point wireless serial communication with data encryption enabled. Please be aware that the Broadcast mode is disabled by default.

To enable the broadcast mode in WiSer devices, read the firmware's file.

README.md